The brickwork of HIPERPRESS brick differs from the brickwork of standard ashlar brick. The standard brick is featured with unstable dimensions and roughnesses so the mortar is used to align them and to hide brick drawbacks. Usually the brickmason first slurs the junction with mortar then the joint is to be pointed up. During this process the brick is soiled with mortar so the mortar could not be washed off. As for HIPERPRESS brickwork it does not require pointing up joints. HIPERPRESS brick fits the requirements of Russian State Standard and blends finely with brickwork of inner and outer walls that are made of burnt or silica brick. It is used to gain the following objects: - improvement of mechanical strength of bearing walls;
- improvement of shock-resistant stability of facing surfaces;
- improvement of frost and erosion resistance of façade of wall;
- improvement of architectural view of wall façade.
The buildings that are coated with HIPERPRESS brick are featured with fine view and infinite number of implementable architectural ideas. Use of yellow, green, brown smooth brick when combined with «savage stone» and turned brick allow to gain the uniqueness of view of any building. Such features of HIPERPRESS brick as its high strength, frost and erosion resistance, longevity of front side of building made of HIPERPRESS brick, aesthetical diversity and compatibility with standard burnt or silica brick are arresting attention of eminent architects and fastidious builders. The fine results of application of HIPERPRESS brick are observed in construction of single-storeyed cottages, administrative buildings, ever-popular restaurants, monques and Orthodox temples and other types of buildings. The most fastidious client is satisfied even when taking local and national specific features into account. | 
